Tuesday, June 29, 2021

Hive One June Block

 Right down to the wire (again), but I hope you enjoy this block. It features two of my favorite fabrics from mask making last year. 






Sunday, June 20, 2021

Hive 1 block for Jayne

 Jayne I made this one completely out of my stash. I did not have any solid greens so used a little woodland print.  Hope you enjoy the little fox faces


peeking through your flowers. 

Carolyn

Wednesday, June 16, 2021

Hive 1 June block for Jayne

 

I haven’t ever made this block! I made 3 versions. I’ll mail tomorrow! 

Sunday, June 13, 2021

Hive 1 June block for Jayne

 

I bought several yards of my floral petal fabric for a great bargain from a woman clearing out a huge stash of quilting fabric. I was planning on using much of it for quilt backs--it was fun being able to cut into it for a block in its own right. My only issue was that I have absolutely no white on white--so my background is a solid white. This will go in the mail tomorrow. --Julia C

Tuesday, June 1, 2021

Hive 3 June Tutorial - Ribbon Star Quilt block

 


Ribbon Star Quilt Block

 

Hello Hive Mates!

I have also loved black background quilts and thought this would be a great way to get a head start on one.

Pick any bright jewel solid color fabric in your stash, just no neon colors please.

Here are some Brights that I pulled out of my stash.  (Wow! Not a very good picture of my brights )

 


The background color is black.  I am using Kona black but use whatever you have. 

 

Below are the fabric requirements:

(6) 4-inch squares of a Bright solid

(6) 4-inch squares of Black

(4) 3.5 inch squares in Black




Match each 4 inch black square to a 4 inch bright square.  Draw a line down the center and sew a ¼ inch on each side of it.

 

        






                                                                                                   

Once you have sewn all of them, cut down the drawn line to make 2 HSTs.  Press your seams open.

 



Trim your HSTs down to 3.5 inches



Once you have all of your blocks trimmed and pressed this is how your rows will layout with the 3.5 black squares in the four corners.

 

ROW 1

 



 

ROW 2

 



  ROW 3

 



 

 

ROW 4

 



Once all of your rows are sewn together, lay them out in the following pattern and sew together using a 1/4 inch seam allowance.

 



Give it a good pressing and you are done.  The block should measure 12 x 12 but don’t worry about trimming it.  Once I have all of the blocks I will trim.

 


            

 

Can’t wait to see all of your blocks.

 Christy


Pattern credit to:

https://www.alandacraft.com/2017/05/18/quilt-block-ribbon-star-quilt-block-tutorial/

Hive 5 May Tutorial -Wonky Star Block

  Happy June!

This is a block that I've been wanting to make for a while.  I think it'll be an amazing quilt!


There are many tutorials out there, but the tutorial that I chose to use is from Scissortail Quilting. (This link will take you directly to the pdf tutorial.)


Background Colors: I would like deep blues.  Think royal blue to dark blue, with minimal secondary colors. I would prefer no novelty fabrics.


Star colors: Bright yellows/golds, with minimal secondary colors.  I would prefer no novelty fabrics.


Directions:  I envision my final quilt having different size star blocks.  For the Stash Bee, we'll use the 12" finished block dimensions (If you'd prefer to make a larger one for me, feel free!).

You'll need: 

    6- 4.5" blue squares

    1- 4.5" yellow square

    scraps of yellow for the star points


First, we'll make the star points.  Sew one of the yellow scraps at an angle from the center of one side, to an adjacent side, right sides together.  Trim the excess blue background fabric (on the right side), then press the yellow star point open.




Next,  trim the excess yellow fabric, then trim to make the unit a 4.5" square again.


Take a yellow scrap and place it on the other side of the unit to make the other point for that unit.  Trim the blue background, press open the yellow star point, then trim the unit again to make it 4.5".



Repeat with 3 other blue background squares to make a total of 4 star point blocks.


Arrange the 4 star points,  4 remaining blue squares and the 1 yellow center square to form a star and then sew together!  The block should end up 12.5", but mine ended up being 12.25", so don't worry if yours if off it bit! No big deal!  I'll make it work!


Let me know if you have any questions.  Thanks everyone and happy sewing!

-Michelle

    


Hive 4 June Tutorial- Pumpkin Block

 Hello from Raleigh, NC! This is my first time doing a stash bee and I've been having a great time and I certainly hope my blocks have been well received by all the previous Queen Bees. I've been sewing for a long time (like over a decade) but I've only been a quilter for about six of those years. Obviously, I took to it fairly well since I've now become a full time longarm quilter. (It's funny how life works) I'm actually writing this post at the start of May so I can be ahead of schedule since my quilting lineup has gotten quite busy and I don't want to fall behind on anything. 

I debated back and forth about what I wanted my block to be. Halloween is my absolute favorite so I almost had everyone make a super spooky and fun block (like a haunted house) but I actually have over five Halloween quilts already and I do hate how I can really only keep them out one month of the year. (I could keep them out longer theoretically but then people tend to give you strange looks.) So I opted to keep it within the "Fall" theme and go with a pumpkin block. That way, I have a solid three months to keep this quilt out. 



So I'm sure that someone at some point designed this block, but I just googled pumpkin quilt blocks and found one that I liked. Then I drafted it out on some graph paper and made my sample for the progress photos and to double check my measurements. Everything looks accurate to me, but if you have any issues, feel free to email me or message me on instagram. I'm always happy to answer questions. 

For color schemes of this block, I'm not too picky. Pumpkins are orange, obviously. I'd prefer more earth tones or deeper oranges because those say Fall to me more than brighter oranges. In my sample, I did a two fabric pumpkin, but don't feel like you need to do that. If you want to use six colors of orange, go for it. The stem can really be any brown you want and the leaf can be mostly any green (I would say nothing too bright though). And for the background, I'd prefer a cream rather than a white. Any of these colors can be a print or a solid, I have no preference in that regard. Here are a few color fabric pulls for "inspiration"




Step 1: Cutting Your Pieces

Orange- Cut 6 strips at 2.5"x10.5"

Green- Cut 1 rectangle at 2.5"x5.5"

Brown- Cut 1 square at 2.5"x2.5"

Cream Background

            Cut 6 squares at 2.5"x2.5"

            Cut 1 rectangle at 2.5"x5.5"

            Cut 2 strips at 1.5"x12.5"

            Cut 2 strips at 1.5"x14.5"

When you lay your pieces out, it'll look at little like this:


Step 2: Sewing the pumpkin body

Sew your 6 orange strips together. Everything in this block is sewn with a 1/4'' seam allowance. Press all seams to one direction (either left or right). 


Take 4 of your 2.5"x2.5" cream background squares and draw diagonal lines on each piece, from one corner to the direct opposite corner. Then place the squares on the corners of the pumpkin piece you just made and pin in place (like the photo below). Proceed to stitch along the line you drew on all four pieces. Then trim 1/4'' on the OUTSIDE of the stitched line. Then press the corners outwards. 


Step 3: Sew Your Stem and Leaf

Take the last two of your 2.5"x2.5" background squares and draw diagonal lines as previously done. Align them to left and right edges of your green rectangle piece, making sure that your diagonal lines are in the same direction of bottom left to top right. (See photo below). Sew along diagonal lines again and trim 1/4'' on the outside of the stitched line. Press corners outwards. Then sew the 2.5"x2.5" brown stem square to the LEFT side of leaf piece and press towards the stem. Lastly, sew the 2.5"x5.5" background rectangle to the left side of the stem square. Press towards the stem. 


Step 4: Sew Stem and Leaf piece to Pumpkin Body

Align your stem and leaf strip to the top edge of your pumpkin body. Pin and sew in place. Press in whichever direction you'd prefer. 

Step 5: Sew Block Borders

Take your two 1.5"x12.5" background strips and sew to the top and bottom of your pumpkin block. Press towards the border. Then sew your 1.5"x14.5" background strips to the left and right edges and press towards the border. Square up, if neccessary. Your finished block should measure 14.5"x14.5".



Thank you, everyone! Hope you enjoyed this block! 


-Carrie