Pages

Sunday, April 1, 2018

Hive 3 April 2018 Tutorial


Modified String Quilt


This is my 3rd year in the Bee, and I really enjoy these mini projects every month.  My family has a lake house in Massachusetts and I'm looking for a bright cheerful string quilt to use at the lake.  

I would like bright light colors, I love purple, blue, yellow, green, aqua, pink, anything bright really. Some of the blocks I have are leaning on the dark side, so I'd really like some lighter blocks to balance it out.
Picture a bright cheerful quilt on a chilly evening at the lake in front the fire.

Here is what I have so far:


I want to highlight the borders around the block by using black and white strips like this quilt pictured by @imquilternity:


Below is a link to the tutorial I started with. In order to get the big black/white borders, you will need to modify the tutorial a bit.  In the middle, use two strips of different black/white fabrics.  Also, my tutorial uses a fabric base in place of paper piecing.  This is because I wanted 10" blocks, and my paper piecing papers weren't big enough.
For the colored strips, I varied the size of my strips from 1-2 inches. 
 

I've provided a complete tutorial below:
You can use the steps below in place of the tutorial above, but I find it nice to have another view of the same process just in case its new to you and confusing.
You will start with a 10" piece white fabric.  You can use any white, it won't show.  In a pinch, you could use any light colored fabric. 
Here are my pictures as I went along:

1. Cut a bunch of 3/4"-2" colorful strips 2-15" in length:

2. Cut two 1" black/white strips.  These should be mostly white. Silver/grey are OK, but please, no brown:


3. Sew the two black/white strips together to form a 1 3/4" strip.  It should be at least 16".

4. Place sewn strips diagonally face up on the white fabric. The tutorial uses a glue stick to hold it down.


5. Start sewing colorful strips alongside each of the black/white strips to cover the fabric.  Instead of the glue stick, I pinned the first colorful strip thru all three layers to hold it down:

6. Open it up and iron. I like to iron as I go, but I like to iron :)   The ironing step is important because it makes the fabric taut so there won't be a bubble or crease.  These bubbles and creases cannot be removed.



7. Continue sewing strips, pressing as you go:



I found it easier to sew both sides together:


8. The finished block will be scrappy and colorful.  You can send to me untrimmed, or trim to 10".


Thank you so much!

Jennifer
@jennquilts 




No comments:

Post a Comment

Thank you for your comments!

Note: Only a member of this blog may post a comment.